I got back late Monday night from a great vacation in Arizona and have lots to catch up on. In the meantime, I thought I would share this project which was my October guest post at Remodelaholic.
.
I have three golf clubs that once belonged to my Grandpa. They aren't especially valuable or antique, but because they are meaningful to me, I wanted a special way to display them. They leaned up against a wall in my lower level until I finally came up with a simple idea to show them off a little better.
.
.
Supplies you will need:
- Plywood board cut to desired size (Mine is 22" x 47")
- 1/2" x 1-1/2" moulding strips
- miter box
- nails
- mending brace
- fabric to cover board
- staple gun & staples
- nail head trim
- cup hooks
- picture hanging supplies
.
.
.
Measure moulding strips and miter corners. This is not hard but requires a little bit of thinking to ensure that your measurements for the mitered corners are correct. As the old saying goes - measure twice - cut once!
.
.
Once your moulding strips are cut & mitered, and the fit is good, you will need to attach them to your board. Use wood glue to attach them to the back of the board. Once dry, turn over and nail along all edges to secure from the front side of the board.
.
.
Attach a mending brace at each corner to ensure a sturdy finished piece.
.
.
Now it's time for the fun part! Use a staple gun to attach fabric to board.
.
.
.
I decided to add a little nail head trim at each corner for a decorative accent.
.
.
.
.
I have three golf clubs that once belonged to my Grandpa. They aren't especially valuable or antique, but because they are meaningful to me, I wanted a special way to display them. They leaned up against a wall in my lower level until I finally came up with a simple idea to show them off a little better.
.
Supplies you will need:
- Plywood board cut to desired size (Mine is 22" x 47")
- 1/2" x 1-1/2" moulding strips
- miter box
- nails
- mending brace
- fabric to cover board
- staple gun & staples
- nail head trim
- cup hooks
- picture hanging supplies
.
Measure moulding strips and miter corners. This is not hard but requires a little bit of thinking to ensure that your measurements for the mitered corners are correct. As the old saying goes - measure twice - cut once!
.
Once your moulding strips are cut & mitered, and the fit is good, you will need to attach them to your board. Use wood glue to attach them to the back of the board. Once dry, turn over and nail along all edges to secure from the front side of the board.
.
Attach a mending brace at each corner to ensure a sturdy finished piece.
.
Now it's time for the fun part! Use a staple gun to attach fabric to board.
.
I decided to add a little nail head trim at each corner for a decorative accent.
.
You will need a way to hang your new wall art. Attach "D-ring" hangers to each side and then attach picture hanging wire.
.
.
.
.
Next, determine where you want your golf clubs to lay on the board.
.
.
Use a pencil to mark where you need to install the cup hooks.
.
.
Attach cup hooks and your project is finished and ready to hang!
.
.
.
.
This project could easily be modified to for many sports - I think tennis rackets, hockey
sticks, or baseball bats would be fun.
.
The fabric I used is by Waverly and is called Cross Section, color: green. You can purchase it here.
.
Sharing here:
Cheap Chic Home
House of Hepworths
Fireflies and Jellybeans
.Finding Fabulous
Tatertots and Jello
Funky Junk Interiors
.
Next, determine where you want your golf clubs to lay on the board.
.
Use a pencil to mark where you need to install the cup hooks.
.
Attach cup hooks and your project is finished and ready to hang!
.
This project could easily be modified to for many sports - I think tennis rackets, hockey
sticks, or baseball bats would be fun.
.
The fabric I used is by Waverly and is called Cross Section, color: green. You can purchase it here.
.
Sharing here:
Cheap Chic Home
House of Hepworths
Fireflies and Jellybeans
.Finding Fabulous
Tatertots and Jello
Funky Junk Interiors
